NEWS
ข่าว
สินค้าใหม่
What kind of air compressor do you need for laser cutting equipment?
Oct 31 , 2024

Laser cutting equipment has high requirements for air compressors, which are mainly reflected in the following aspects:

1.Stable air pressure output: Laser cutting requires high-pressure gas to purge and cool the cutting area to achieve the best cutting results. Therefore, the air compressor needs to provide a stable air pressure output to ensure that the pressure of the gas output is constant, and to ensure the stability and continuity of the air pressure during the cutting process.

2.Efficient working performance: The gas flow required for laser cutting is usually very large, and the air compressor needs to have efficient working performance to ensure the air pressure output and meet the high flow gas output requirements.

3.High-quality gas: The gas used in laser cutting is usually a high-purity gas, and the quality of the gas directly affects the quality of the cutting effect. Air compressors need to provide high-quality gases, including high-pressure pure oxygen, high-pressure nitrogen, high-pressure argon, etc., to ensure that the purity and quality of the gas meet the requirements.

4.Reliable performance and stability: In the laser cutting process, the air compressor is one of the key auxiliary equipment, and its performance and stability directly affect the quality and efficiency of the entire cutting process. The air compressor needs to have reliable performance and stability to ensure the continuous and stable air pressure output during the cutting process.

5.Pressure and flow requirements: Laser cutting has strict requirements for air compressors, and it is difficult for ordinary air compressors to meet their requirements. The laser cutting industry has strict requirements for pressure, flow and air quality.

6.Drying and purification requirements: The laser cutting air system is particularly sensitive to oil and water content, and failure to meet the standards may result in waste products or economic losses.

7.Model selection: Screw air compressor is generally recommended below 1.6MPa, and suitable refrigeration dryer and precision filter are selected. The compressor should use a permanent magnet inverter motor to maintain the stability of the air supply pressure and ensure the best cutting effect.

8.All-in-one air compressor: In order to simplify installation and operation, some manufacturers provide all-in-one air compressors, which integrate compressors, air tanks, water separators, refrigeration dryers, and filters, saving users the trouble of configuring their own air storage tanks, refrigeration dryers, and filters.

Laser cutting equipment requires air compressors with stable air pressure output, efficient working performance, high-quality gas supply, reliable performance and stability, and meeting specific pressure and flow requirements. At the same time, the air compressor should also be equipped with appropriate drying and purification equipment to ensure that the compressed air is clean and dry, and meet the high standard requirements of laser cutting.

ฝากข้อความ
ฝากข้อความ
ถ้า คุณสนใจในผลิตภัณฑ์ของเราและต้องการทราบรายละเอียดเพิ่มเติมโปรดฝากข้อความไว้ที่นี่เราจะตอบกลับคุณโดยเร็วที่สุด ทำได้

บ้าน

ผลิตภัณฑ์

เกี่ยวกับ

ติดต่อ